How To Flash Samsung Galaxy S5 Mobile?

Hey, Today I am going to give you a step by step in which you are going to learn how to flash Samsung Galaxy S5. S5 is one of the smartest phones from the Samsung's S series and if you have got one, you might want to unlock it. To flash Samsung Galaxy S5, you are going to need a list of things which I am going mention below as prerequisites for the method. Once you have these things, you can go on with the final process. Listed below are the requirements before you try to do this flashing process.

1. Your phone must be pre-rooted before the process.

2. You should have Samsung Stock Firmware.

3. Android Lollipop version 5.1.1 or above.

4. Make sure that you have installed all the latest mobile drivers for Samsung Galaxy S5.

5. Your phone must have a battery backup of 70% or more.

6. Make sure that USB Debugging is enabled from the settings.

Step-by-Step Guide to Flash Samsung Galaxy S5.

Here is a list of all the steps involved in the flashing process.

1. Make sure that you download Stock Rooted Custom Rom for Android 5.1.1 and copy the zip files to SD card once you have connected your phone to the computer.

2. Now you will need to enter the recovery mode which is done by pressing and holding down the Volume Up button, alongside Home and the Power button, until the screen flashes.

3. Now wipe the data by doing a factory reset and nnce done, go back to recovery menu and Wipe Cache Partition and then Wipe Dalvik Cache as well.

4. Now install the zip file which you copied earlier to the SD card.

5. Now repeat the same process for the GApps instead of doing it for the ROM.

And this is it. You have successfully done the flashing of Samsung Galaxy S5. I hope that you liked that you liked this article and learned the flashing process very well. Keep visiting our website for more tech guides and stuff.

Read more

How To Flash Samsung Galaxy S6 (Full Guide)

Before, we talked about the flashing of Samsung Galaxy S3. Today, I am going to an easy guide on how to flash Samsung Galaxy S6. This will be just another simple guide to do the process just like the previous one. First, you need to know the benefits you can get by flashing your phone. This is a flashing guide for Samsung galaxy S6 and S6 edge which might help you to unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsung's stock firmware instead of custom ROM. This guide for all Samsung galaxy S6 and S6 edge variant (International, AT&T, Verizon, T-Mobile, Sprint, Canadian, etc).

Prerequisites to Flash Samsung Galaxy S6.

1. Official firmware file for the model number of your device, download it from SamMobile or Samsung-Updates.

2. The latest version of Odin3 tool.

3. Samsung Smart Switch or Samsung mobile USB driver.

4. Charged Samsung galaxy S6 or S6 edge (more than 70%).

5. USB cable and Windows PC.

Steps to Flash Samsung Galaxy S6

1. Download, install Samsung driver or Smart Switch.

2. Download, unzip firmware file and Odin.

3. Double-click odin3 tool, click AP and navigate to the *.tar or *.tar.md5 firmware file.

4. Put your phone into download mode (Vol Down+Home+Power) then Vol Up.

5. Connect your device to the computer and wait until you get a sign in ID:COM section and "Added" in the message box.

6. Don't change Odin's options.

7. Click Start and wait few minutes until you see "PASS!" in Odin.

8. If your phone stuck in boot loop, reboot your device into recovery mode then choose factory reset.

After following these simple steps, your Samsung Galaxy S6 will be flashed. Ask anything or leave us your feedback in the comments section. Keep visiting our website for more tech guides and enjoy!

Read more

How To Flash Samsung Galaxy S3 i9300?

If you are still using one of the most beautiful smartphones from the Samsung's S series which is S3 and you are looking to flash it then you are at the right spot. Today, I am going to give you a quick guide with the help of which you can easily flash your Samsung Galaxy S3. So, let us move us with our task of flashing Samsung Galaxy S3 i9300.

Here are few prerequisites which you got to do before moving on to flash Samsung Galaxy S3 i9300.

1. Make sure that you have downloaded the USB drivers for your phone.

2. Don't forget to make a back up of any important data that is present on your phone because otherwise, you will lose it.

3. Make sure that you have a battery backup of more than 70% because this process could take a while.

4. USB debugging must be enabled from the settings in your phone.

Once all these things are taken care of, we can move with the flashing process.

Flashing Samsung Galaxy S3 i9300.

Here is a step by step guide to Flash Samsung Galaxy S3 i9300.

1. Extract both the Odin files and the firmware zip files.

2. Now turn your phone off and start it in the boot mode by pressing the power, home, and volume down button together.

3. Odin will automatically detect your device once you have connected it with the help of a USB cable. Now select the following files in the Odin. Make sure that the following order is being followed.

4. Click on AP / PDA and select file with CODE in its name.

5. Click on CP/Phone and select file with MODEM in its name – ignore if you didn’t get any such file.

6. Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.

8. Click on PIT and select the .pit file – ignore if you didn’t get any such file.

9. After the above steps, mark F.Rest Time and Auto-Reboot. In case you have select the pit file, check re-partition as well.

10. Now start the update and once it is done, reboot your phone and disconnect the cable.

So, this was an easy step by step guide to Flash Samsung Galaxy S3 i9300. If you liked this article then don't forget to leave us your feedback and ask any question that you want to ask as well. Keep visiting our website for more tech guides and free drivers.

Read more